发表于2004/4/12 12:52:00 6612人阅读
Selecting, Confirming & Deleting Multiple Checkbox Items In A DataGrid (i.e. HotMail & Yahoo)
Although I don't have either a Hotmail or Yahoo email account, I do have friends that do, and I have often seen them check their e-mail and noticed how it was all neatly displayed in a table. Right next to each item in their e-mail table was a simple little checkbox. At the bottom or top of this table you would have another checkbox giving them the ability to select all of the e-mail, and a button to submit back. Once this was done they would receive a nice popup alert to confirm what's about to happen, and then once this is OK' ed, boom, all the selected items are deleted.
.NET, of course, has the DataGrid, their finest and most popular control to date, and it should be pretty easy to get the same functionality, right? Well, not quite. Doing this with .NET is not that straightforward and functional as I would've liked it to be. Sure it's quite easy to add an edit / update button or link to each row and even a delete button to each, alongside a pop up alert as well! However, applying this delete feature to each and every button and deleting them one by one is a little maddening. Nor is the DataGrid set up in allowing a way of adding a main "select all" checkbox to easily select all of the boxes, and then applying any particular action.
In this article, we will examine how to create a fully functional DataGrid with all the features you'd find set up on Hotmail or Yahoo. As an added bonus we'll be performing all of our data tasks strictly utilizing Microsoft's new Data Access Application Block or DAAB v2. To any who may feel a little behind with DAAB, have no fear, everything here can still be accomplished with pre-DAAB data objects as the only difference here is the data access part of it. Trust me there is a huge difference between the two, for one DAAB enable you to write about 75% less code that you would normally need when compared with regular ADO.NET!
So, before we begin, download the DAAB dll from the above link, install it, and copy it into you application’s bin folder and you're ready to go. Also, be sure and take a peek at the DAAB documentation that came with your installation for an overview and any questions you may have.
Ok, let's get to it then.
Our fully-featured DataGrid
Have a look at Figure 1 to get an idea of what your DataGrid will look like:
Here is the code to set up our DataGrid:
The code listed above is what makes our DataGrid set up behave just like the grids on Hotmail and Yahoo. Our .NET DataGrid will have the same functionality and options available for selecting however many items, or perhaps all, that you'd like to delete, and once you do and submit, kiss them goodbye.
The first step towards creating this functionality is to begin by adding a new DataGrid column (either before or after our main data, it doesn't matter) that'll contain our individual checkboxes, but also include our main top "select all" checkbox (if and when we need to select and deselect all the checkboxes below it). To do this we first make sure our DataGrid's AutoGenerateColumns property is set to false, since we're going to create the necessary custom Header and Item Templates, alongside our necessary BoundColumns, within our DataGrid Columns section (that can be customized and could contain whatever you need them to).
Selecting and De-Selecting our Checkboxes
Now, aside from this function allowing a quick full selection, you also have the option of manually selecting as many checkbox items as you wish. Next comes the tricky part in how to determine which ones were selected, and how to confirm this the instant you submit the form, and prior to actual deletion.
Confirming Multiple Deletes
In this section, we'll examine how to confirm multiple deletes when we submit our form. Below in Figure 3 you can now see the alert confirmation after selecting a couple of items, and then submitting the form by press the "Delete Items" button. The alert takes place at any time you submit the form (as long as you have more than one checkbox selected).
Note that this confirmation will alert with all checkboxes selected or a just a few as shown. Pressing the Delete Items button with none selected will not prompt any alert. Here now is how we determine what checkboxes are actually checked.
The first thing we did was set up our Delete Button at the end of our DataGrid; just a regular asp server button. We also wired a server-side event to it - Delete Store - that, when confirmed, will delete the records:
But how does that pop-up alert confirmation appear? Well, that's the cool thing. We get this by adding the code listed below to our Button server control as soon as the page loads, in our Page_Load method, by locating it using the FindControl method and then adding to the button attributes, like so:
Looking at the DeleteStore() method, you'll notice that it is actually does a few things. First, it set's up the string variable "dgIDs" that will hold all of our selected DataGrid IDs. Next, it loops through the DataGrid, and gathers all of the selected item ids that are based on the row's TemplateColumn ID, which is why I kept the ID control as a TemplateColumn and the rest BoundColumns as these types of controls do not support the ID property we need for referencing our data. After this, it will, upon verifying checked items, gather all the ids and assign them to our "dgIDs" variable, that'll be used with our SQL "deleteSQL" delete statement.
The "deleteSQL" delete statement uses the "WHERE IN" argument to perform the multiple deletes in one shot. Since we need to separate each id with a comma, you'll notice that in the loop I attach a comma after each collected item. This way we'll have all of our items clearly defined in our SQL. One problem however is that since we add on a comma after each collected item, the last one as well will include a tail-end comma and SQL won't like this. For example, once we loop through the DataGrid, gather up all of the selected items, and assign it to our delete string we could end up with something like this:
Notice the last comma; that's a no-no. To quickly and easily remedy this, we must remove the last comma, and we do this by pulling the substring we need from the "dgIDs" string using LastIndexOf (",") effectively removing the last comma, and properly formatting the delete statement for SQL, like so:
Finally, DeleteStore proceeds to execute the query against the database. Incidentally, for those wondering why I have a conditional with BxsChkd? Well it's because if I don't initially select any items, I'm returned an error on Page_Load due to our SqlHelper having nothing initialized. Therefore, by do so, our DeleteStore method will remain silent, and happily waiting in the wings until it does get the actual go ahead.
So that's the crux of our DataGrid application, and technology behind doing multiple checkbox deletes a la Hotmail and Yahoo style. And on that note, here's all the code. Just have SQL Server ready, DAAB installed, then cut and paste the code below, and have fun.
Here's our main page code:
And our MultiDeleteDG.WebForm code-behind file - mDatagrid.aspx.cs:
Well, that's it. Pretty awesome, and there was sure a lot to grasp as this certainly was a fairly complex article; but look at what you can do with a DataGrid now? There's nothing preventing you from adding paging to it although you'll have to delete whatever you need per page before paging to the next, or you could also store all your selected values in View State or any of of state methods, then pull them from there at the end.
At any rate, .NET clearly demonstrates that its Framework and all included is simply the best once again. Period!
Until next time. Happy .NETing
- 通过JS为 Table表增加一行，通过复选框删除多行，也可通过所在行的delete链接删除本行
- flex DataGrid复选框源码
- 18. JAVA 图形界面 Part 2（JTextComponent、事件处理、单选按钮、复选框、列表框、下拉列表框、菜单组件、文件选择） ----- 学习笔记
- EasyUI入门2 datagrid复选框全选效果（通过约束条件实现部分项参与的全选效果）
- EASYUI DATAGRID 多列复选框CheckBox