CSDN博客

img imquestion

JIURL键盘驱动 3

发表于2003/12/18 0:14:00  3279人阅读

JIURL键盘驱动 3

作者: JIURL

                主页: http://jiurl.yeah.net

    日期: 2003-12-13


4 编译与调试环境简介

4.1 源码

    ps/2键盘驱动的设备栈有3层,最底层设备对象的驱动是 acpi,中间层设备对象的驱动是 i8042prt,最高层设备对象的驱动是 kbdclass。

    DDK 所附的源码中有 i8042prt 和 kbdclass 的源码,分别位于 .../NTDDK/src/input/pnpi8042 ,.../NTDDK/src/input/kbdclass 。

    注意,在目前DDK所附的源码中没有 acpi 的源码,不过 acpi 对于键盘驱动几乎没有起什么作用。在DDK中可以找到一个叫acpi的目录,但那个下面并不是acpi.sys的源码,而是acpiec.sys的源码,没有用处。

4.2 关闭文件保护替换系统中的驱动

    我们要用我们自己编译的 debug 版本的 i8042prt.sys 和 kbdclass.sys 替换在 .../WINNT/system32/drivers 下系统原来的这两个sys文件。

不过由于有文件保护,我们替换之后,系统会立刻自动替换会原来的。因此我们关闭了win2k的文件保护。

替换驱动文件还有其他的方法,不过在这里关闭文件保护,直接替换驱动文件,对我们最合适。

4.3 改动源码以产生调试信息

    为了得到调试信息,我们修改了少量的源码。修改很多地方可能都可以达到这个目的。这里介绍的只是一种方法。

4.3.1 改动 kbdclass 

kbdclass.h 中

#define DEFAULT_DEBUG_LEVEL 0 

改为 

#define DEFAULT_DEBUG_LEVEL 3 //#define DEFAULT_DEBUG_LEVEL 0

4.3.2 改动 i8042prt

i8042prt.h 中

#define Print(_flags_, _x_) /
if (Globals.DebugFlags & (_flags_) || !(_flags_)) { /
DbgPrint (pDriverName); /
DbgPrint _x_; /
}
#define IsrPrint(_flags_, _x_) /
if (Globals.IsrDebugFlags & (_flags_) || !(_flags_)) { /
DbgPrint (((ULONG)(_flags_)) >= 0x0001000 ? pIsrMou : pIsrKb); /
DbgPrint _x_; /
}

改为

#define Print(_flags_, _x_) /
{ /
DbgPrint (pDriverName); /
DbgPrint _x_; /
}
#define IsrPrint(_flags_, _x_) /
{ /
DbgPrint (((ULONG)(_flags_)) >= 0x0001000 ? pIsrMou : pIsrKb); /
DbgPrint _x_; /
}

由于我使用 WinDbg 单机调试,当我要获得按一个键的调试信息时,发现鼠标导致的调试信息不停的出现,使我没有办法在目标系统中按一个键,所以我去掉了一些打印调试信息的语句,来获得在目标系统中按一个键的机会。

注释掉 I8042MouseInterruptService,I8042MouseIsrDpc,I8xWriteDataToMouseQueue,I8xGetByteAsynchronous 中的所有调试打印语句。

4.4 源码级调试

    使用 WinDbg 进行源码级调试。单机使用 WinDbg ,可以参考文章《借助VMware实现单机使用WinDbg》,这篇文章可以在我的主页上找到。


5 键盘驱动概述

    键盘驱动位于应用层win32k!RawInputThread和硬件i8042之间。win32k!RawInputThread 总是发一个 IRP_MJ_READ 的 IRP 到键盘设备栈的顶端,等待着来自键盘的数据。当i8042有数据要键盘驱动取走的时候,就会触发中断,这个中断的中断服务例程是键盘驱动中的函数,于是键盘驱动就可以从i8042读取数据,经过一系列处理最终完成那个等待的 IRP。

5.1 键盘设备栈

    我们首先来看看键盘驱动的设备栈。对于初始化完成之后,处于运行状态,并且插有 ps/2 键盘的系统,我们看看它的键盘设备栈是什么样子。

我们通过 WinObj 之类的工具查看对象管理器命名空间 (Object Manager Namespace),可以看到在 /driver/ 下的名叫 kbdclass 的驱动对象。在处于运行状态下的系统中,打断进入WinDbg,我们使用WinDbg 的 !drvobj 命令,可以得到它的设备对象列表。

kd> !drvobj /driver/kbdclass
Driver object (fe4f6330) is for:
/Driver/Kbdclass
Driver Extension List: (id , addr)

Device Object list:
fe4f5df0 

设备对象只有一个,地址为 fe4f5df0,使用WinDbg 的 !devobj 命令,来获得一些这个设备对象的信息。

kd> !devobj fe4f5df0
Device object (fe4f5df0) is for:
KeyboardClass0 /Driver/Kbdclass DriverObject fe4f6330
Current Irp fe43e6c8 RefCount 0 Type 0000000b Flags 00002044
DevExt fe4f5ea8 DevObjExt fe4f5fd8 
ExtensionFlags (0000000000) 
AttachedTo (Lower) fe4f5020 /Driver/i8042prt
Device queue is busy -- Queue empty.

看到这个设备对象有个名字叫 KeyboardClass0,我们用 WinObj 也可以在 /Device/ 下看到这个设备对象。

使用 WinDbg 的 !devstack 命令,来看看设备对象 fe4f5df0 也就是 /Device/KeyboardClass0 所在的设备栈

kd> !devstack fe4f5df0
!DevObj !DrvObj !DevExt ObjectName
> fe4f5df0 /Driver/Kbdclass fe4f5ea8 KeyboardClass0
fe4f5020 /Driver/i8042prt fe4f50d8 
fe4dd730 /Driver/ACPI fe507468 0000000e
!DevNode fe4fed68 :
DeviceInst is "ACPI/PNP0303/4&5289e18&0"
ServiceName is "i8042prt"

我们看到
设备栈最顶层的设备对象是 fe4f5df0,有名字,叫做 KeyboardClass0,属于驱动 Kbdclass。
设备栈中间层的设备对象是 fe4f5020,没有名字,属于驱动 i8042prt。
设备栈最底层的设备对象是 fe4dd730,有名字,0000000e,属于驱动 ACPI。

!DevNode 部分的内容和注册表有关,我们会在后面讨论。
要注意的是,ACPI用于键盘驱动的那个设备对象的名字,和你计算机上安了多少外设有关,在我这里是 0000000e,在你那里很可能不是。
我们看到的 /Driver/Kbdclass,/Driver/i8042prt,/Driver/ACPI 是驱动对象的名字。一个驱动对象就对应着一个驱动程序文件。

我们再看一下 /Driver/i8042prt 的设备对象列表。

kd> !drvobj /driver/i8042prt
Driver object (fe4f69f0) is for:
/Driver/i8042prt
Driver Extension List: (id , addr)

Device Object list:
fe4d3ba0 fe4f5020 

可以看到有两个设备对象。使用 !devobj 我们可以知道,一个是用于ps/2键盘驱动的设备对象,一个是用于ps/2鼠标驱动的设备对象。

acpi 更是有多个设备对象。

最早我就是看到 kbdclass 的名字,猜测这就是键盘的驱动程序,进而看到了它的设备栈,看到了 i8042prt,acpi,后来实践也证明了 kbdclass ,i8042prt 就是键盘驱动。

我们这里看到的 ps/2 键盘的设备栈,是没有自己另外安装其他键盘过滤程序的情况。

最顶层的设备对象是 驱动 Kbdclass 的设备对象。
中间层的设备对象是 驱动 i8042prt 的一个设备对象。
最底层的设备对象是 驱动 ACPI 的一个设备对象。

5.2 各层简介

Kbdclass

键盘设备栈的栈顶,应用层发出的所有 IRP,都首先发到这里。对于那个等待键盘数据的 IRP_MJ_READ 的 IRP,完全由这一层处理,不向下传。

i8042prt

对硬件i8042的所有操作都在这一层完成。键盘中断的中断服务例程也是这一层的函数。使用 WinDbg 的 !idt 命令可以看到这一点。

kd> !idt

IDT for processor #0

00: 804625e6 (nt!KiTrap00)
01: 80462736 (nt!KiTrap01)
...
b3: fe4cf264 (Vector:b3,Irql:a,SyncIrql:a,Connected:TRUE,No:0,ShareVector:FALSE,Mode:Latched,ISR:i8042prt!I8042KeyboardInterruptService(fe1c1750))
...
ff: 804613f0 (nt!KiUnexpectedInterrupt207)

可以看到中断向量为 b3 的中断服务例程最终为 i8042prt!I8042KeyboardInterruptService,即 i8042prt 中的函数 I8042KeyboardInterruptService 。

驱动的中断和一般的中断有所不同,我们将在后面做讨论。

ACPI

这一层几乎不起什么作用。

5.3 键盘驱动的运作

    键盘驱动的主要工作就是,当键盘上有键按下引发中断时,键盘驱动从端口读出按键的扫描码,最终顺利的将它交给在键盘设备栈栈顶等待的那个 IRP_MJ_READ 的 IRP。为了完成这个任务,键盘驱动使用了两个循环使用的缓冲区。

i8042prt 和 kbdclass 各有自己的一个,循环使用的缓冲区。他们的每个单元是一个 KEYBOARD_INPUT_DATA 结构,用来存放一个扫描码及其相关信息。在键盘驱动的注释中,把这个循环使用的缓冲区叫做输入数据队列(input data queue),i8042prt 的那个缓冲区被叫做 port keyboard input data queue,kbdclass 的那个缓冲区被叫做 class input data queue。输入数据队列更形象一些,我们也会使用这种叫法。

i8042prt 的自定义的设备扩展中,保存着一些指针和计数值,用来使用它的那个输入数据队列。
PKEYBOARD_INPUT_DATA 类型的 InputData , DataIn , DataOut , DataEnd。ULONG 类型的 InputCount。
InputData 这个指针,指向输入数据队列的开头。
DataEnd 这个指针,指向输入数据队列的结尾。
DataIn 这个指针,指向要进入队列的新数据,将要被放在队列中的位置。
DataOut 这个指针,指向要出队列的数据,在队列中开始的位置。
InputCount 这个值为输入数据队列中,数据的个数。

kbdclass 的自定义的设备扩展中,保存着一些指针和计数值,用来使用它的那个输入数据队列。
PKEYBOARD_INPUT_DATA 类型的 InputData , DataIn , DataOut , DataEnd。ULONG 类型的 InputCount。
InputData 这个指针,指向输入数据队列的开头。
DataEnd 这个指针,指向输入数据队列的结尾。
DataIn 这个指针,指向要进入队列的新数据,将要被放在队列中的位置。
DataOut 这个指针,指向要出队列的数据,在队列中开始的位置。
InputCount 这个值为输入数据队列中,数据的个数。

对于这两个输入数据队列,
放入一个数据,这个数据应该被放在 DataIn 处,然后DataIn 后移一格,InputCount 加 1。当 DataIn 移到队列的结尾时,将从队列的开头重新开始。
取出一个数据,这个数据应该从 DataOut 处取出,然后 DataOut 后移一格,InputCount 减 1。当 DataOut 移到队列的结尾时,将从队列的开头重新开始。

对于 i8042prt 的输入数据队列。键盘中断服务例程中,从i8042读出的按键信息,放入i8042prt的输入数据队列。上层处理输入的回调函数中,取出i8042prt的输入数据队列中的数据。

对于 kbdclass 的输入数据队列。只有当那个等待的 IRP_MJ_READ IRP 要求读的大小,小于i8042prt的输入队列中放入的数据时,才被使用。也就是说,只有当那个等着读的 IRP 读不完输入数据时,才使用 kbdclass 的输入数据队列。当那个等着读的 IRP 读完要求的数据后,还有剩余时,剩余的数据放入kbdclass的输入数据队列。下一次的应用层发来的 IRP_MJ_READ IRP,当发现kbdclass的输入数据队列中有数据时,直接从kbdclass的输入数据队列中读出数据。

下面我们对键盘驱动处理键盘按键的过程做一个概括介绍

当键盘上一个键被按下时,产生一个 Make Code ,引发键盘中断。

当键盘上一个键被松开时,产生一个 Break Code,引发键盘中断。

键盘中断导致键盘中断服务例程被执行。导致最终 i8042prt 的I8042KeyboardInterruptService 被执行。I8042KeyboardInterruptService 中,从端口读出按键的扫描码,放在一个 KEYBOARD_INPUT_DATA 中。将这个 KEYBOARD_INPUT_DATA 放入 i8042prt 的输入数据队列中,一个中断放入一个数据,DataIn 后移一格,InputCount 加 1。最后会 KeInsertQueueDpc 一个进行更多处理的 DPC(延迟过程调用)。

DPC 中,调用上层处理输入的回调函数(也就是 kbdclass 处理输入数据的函数),取走i8042prt的输入数据队列里的数据。因为设备扩展中保存着上层处理输入数据的回调函数的入口地址,所以他知道该调用谁。上层处理输入的回调函数(也就是 kbdclass 处理输入数据的函数)取走数据之后,i8042prt 的输入数据队列的 DataOut 相应后移,InputCount 相应减少。

kbdclass 处理输入数据的函数中,满足那个应用层发来的等着读数据的 IRP。
当 IRP 要求读的数据的大小,大于等于,i8042prt的输入数据队列中的数据时,IRP 直接从 i8042prt的输入数据队列中,读出所有输入数据,不使用kbdclass的输入数据队列。大多数情况下都是这样。
当 IRP 要求读的数据的大小,小于,i8042prt的输入数据队列中的数据时,IRP 直接从 i8042prt的输入数据队列中,读出它所要求的大小,然后这个 IRP 被完成。i8042prt的输入数据队列中剩余的数据,被放入kbdclass的输入数据队列中。当应用层发来下一个读数据的 IRP 时,那个 IRP 将直接从 kbdclass 的输入数据队列中,读取数据,不需要等待。

    键盘驱动各层的设备对象是在初始化过程中创建的。键盘驱动设备栈是在初始化过程中构造的。键盘中断是在初始化过程中连接的。kbdclass 处理输入数据的回调函数的入口地址,是在初始化过程中告诉 i8042prt的,i8042prt把这个入口地址保存起来。i8042prt 和 kbdclass 的输入数据队列是在初始化过程中分配的内存。他们的 InputData , DataIn , DataOut , DataEnd , InputCount 在初始化的时候设置的初值。

详细的键盘驱动对键盘按键的处理,在以后讨论。


6 键盘驱动的初始化

6.1 键盘驱动初始化调试信息

以下是使用 WinDbg 获得的调试版键盘驱动在初始化过程中的调试打印的输出。
符号 [注释] 后的内容,是我加的简单注释。
以 jiurl 开头的语句,是我自己在 kbdclass 中加的调试打印语句。

[注释] i8042prt!DriverEntry
8042: I8xServiceParameters: /Parameters path is /REGISTRY/MACHINE/SYSTEM/ControlSet001/Services/i8042prt/Parameters
8042: breaking on SysRq
8042: I8xServiceParameters results..
8042: Debug flags are 0x88888808, Isr Debug flags are 0x0
8042: Interrupts are not shared
8042: StallMicroseconds = 50
8042: ResendIterations = 3
8042: PollingIterations = 12000
8042: PollingTerationsMaximum = 12000
8042: DriverEntry (0x0) 

[注释] kbdclass!DriverEntry
jiurl DriverEntry
KBDCLASS-KbdConfiguration: parameters path is /REGISTRY/MACHINE/SYSTEM/ControlSet001/Services/kbdclass/Parameters
KBDCLASS-KbdConfiguration: Keyboard class base name = KeyboardClass
KBDCLASS-KbdConfiguration: KeyboardInputDataQueueLength = 0x4b0
KBDCLASS-KbdConfiguration: MaximumPortsServiced = 3
KBDCLASS-KbdConfiguration: Connection Type = 1
jiurl KbdDeterminePortsServiced
KBDCLASS-KbdDeterminePortsServiced: RtlQueryRegistryValues failed with 0xc0000034
KBDCLASS-KeyboardClassInitialize: Will service 0 port devices
KBDCLASS-KeyboardClassInitialize: exit

[注释] i8042prt!I8xAddDevice
8042: enter Add Device 
8042: Add Device (0x0)

[注释] kbdclass!KeyboardAddDevice
jiurl KeyboardAddDevice
jiurl KbdCreateClassObject
KBDCLASS-KbdCreateClassObject: enter
KBDCLASS-KbdCreateClassObject: Creating device object named /Device/KeyboardClass0
jiurl KbdInitializeDataQueue
KBDCLASS-KbdInitializeDataQueue: enter
KBDCLASS-KbdInitializeDataQueue: exit
KBDCLASS-KbdCreateClassObject: exit
jiurl KeyboardQueryDeviceKey
jiurl KeyboardQueryDeviceKey
jiurl KeyboardQueryDeviceKey
jiurl KeyboardAddDeviceEx
jiurl KbdSendConnectRequest
KBDCLASS-KbdSendConnectRequest: enter

8042: IOCTL: enter
8042: IOCTL: keyboard connect

jiurl KeyboardClassPassThrough

8042: IOCTL: enter
8042: hook keyboard received!
8042: IOCTL: exit (0x0)

8042: result of sending 0xb3fc3 was 0x0
8042: IOCTL: exit (0x0)

KBDCLASS-KbdSendConnectRequest: exit

KBDCLASS-KeyboardClassInitialize: Stored /Device/KeyboardClass0 in DeviceMap

[注释] IRP_MJ_PNP IRP_MN_QUERY_LEGACY_BUS_INFORMATION
jiurl KeyboardPnP

8042: I8xPnP (kb), enter (min func=0x18)
8042: I8xPnP (kb) exit (status=0xc00000bb)

[注释] ps/2 鼠标的调试信息,我们不关心
8042: enter Add Device 
8042: Add Device (0x0)
8042: IOCTL: enter
8042: IOCTL: mouse connect
8042: IOCTL: enter
8042: hook mouse received!
8042: Mou Hook Routine 0xf91ff2fa
8042: IOCTL: exit (0x0)
8042: result of sending 0xf3fc3 was 0x0
8042: IOCTL: exit (0x0)
8042: I8xPnP (mou), enter (min func=0x18)
8042: I8xPnP (mou) exit (status=0xc00000bb)


[注释] IRP_MJ_PNP IRP_MN_FILTER_RESOURCE_REQUIREMENTS
jiurl KeyboardPnP

8042: I8xPnP (kb), enter (min func=0xd)
8042: Received IRP_MN_FILTER_RESOURCE_REQUIREMENTS for kb
8042: option = 0x1, flags = 0x11
8042: Saw port [0x00000000 00000060] - [0x00000000 00000060]
8042: option = 0x1, flags = 0x11
8042: Saw port [0x00000000 00000064] - [0x00000000 00000064]
8042: I8xPnP (kb) exit (status=0x0)

[注释] ps/2 鼠标的调试信息,我们不关心
8042: I8xPnP (mou), enter (min func=0xd)
8042: Received IRP_MN_FILTER_RESOURCE_REQUIREMENTS for mouse
8042: I8xPnP (mou) exit (status=0x0)

[注释] IRP_MJ_PNP IRP_MN_START_DEVICE
jiurl KeyboardPnP
jiurl KeyboardSendIrpSynchronously
8042: I8xPnP (kb), enter (min func=0x0)
8042: I8xKeyboardStartDevice, enter
8042: port is io.
8042: port is io.
8042: Keyboard interrupt config --
NonSharable, Latched, Irq = 0xb3
8042: Using default keyboard type
8042: Keyboard device specific data --
Type = 4, Subtype = 0, Initial LEDs = 0x0
8042: I8xKeyboardServiceParameters results..
8042: PollStatusIterations = 12000
8042: PowerCapabilities = 0x0
8042: I8xServiceCrashDump: crashdump path is /REGISTRY/MACHINE/SYSTEM/ControlSet001/Services/i8042prt/Crashdump
8042: I8xServiceCrashDump: RtlQueryRegistryValues failed with 0xc0000034
8042: I8xServiceCrashDump: Dump1Keys = 0
8042: I8xServiceCrashDump: Dump2Key = 0
8042: I8xInitializeDataQueue: enter
8042: I8xInitializeDataQueue: keyboard
8042: I8xInitializeDataQueue: exit
8042: skipping init until mouse
8042: I8xKeyboardStartDevice successful
8042: I8xKeyboardStartDevice exit (0x0)
jiurl KbdSyncComplete
8042: I8xPnP (kb) exit (status=0x0)
jiurl KeyboardSendIrpSynchronously
8042: I8xPnP (kb), enter (min func=0x9)
jiurl KbdSyncComplete
8042: I8xPnP (kb) exit (status=0x0)

[注释] IRP_MJ_PNP IRP_MN_QUERY_CAPABILITIES
jiurl KeyboardPnP
8042: I8xPnP (kb), enter (min func=0x9)
8042: I8xPnP (kb) exit (status=0x0)

[注释] IRP_MJ_PNP IRP_MN_QUERY_PNP_DEVICE_STATE
jiurl KeyboardPnP
jiurl KeyboardSendIrpSynchronously
8042: I8xPnP (kb), enter (min func=0x14)
jiurl KbdSyncComplete
8042: I8xPnP (kb) exit (status=0x0)

[注释] IRP_MJ_PNP IRP_MN_QUERY_DEVICE_RELATIONS
jiurl KeyboardPnP
8042: I8xPnP (kb), enter (min func=0x7)
8042: I8xPnP (kb) exit (status=0x0)

[注释] 鼠标的 IRP_MJ_PNP IRP_MN_START_DEVICE
8042: I8xPnP (mou), enter (min func=0x0)
8042: I8xMouseStartDevice, enter
8042: Mouse interrupt config --
NonSharable, Latched, Irq = 0x52
8042: results from services key:
mouse queue length = 100
number of buttons = 0
sample rate = 60
resolution = 3
synch tick count = 10000000
wheel detection = 1
detection timeout = 0
intiailize polled = 0
reset stall time = 1000
8042: results from devnode key:
mouse queue length = 100
number of buttons = 0
sample rate = 60
resolution = 3
synch tick count = 20000000
wheel detection = 2
initialize polled = 0
detection timeout = 1500
8042: wheel id: MSH0002
8042: wheel id: MSH0005
8042: wheel id: MSH0010
8042: I8xMouseServiceParameters results..
8042: EnableWheelDetection = 0x2
8042: MouseDataQueueSize = 0x960
8042: NumberOfButtons = 2
8042: SampleRate = 60
8042: MouseResolution = 3
8042: MouseResetStallTime = 1000
8042: WheelDetectionTimeout = 96
8042: MouseSynchIn100ns = 0x80
8042: I8xInitializeDataQueue: enter
8042: I8xInitializeDataQueue: mouse
8042: I8xInitializeDataQueue: exit

[注释] i8042prt!I8xMouseStartDevice-> I8xMouseInitializeHardware-> [未完]
[接上] I8xInitializeHardwareAtBoot-> I8xSanityCheckResources
8042: NonSharable, Ports (#0) 0x60 - 0x60
8042: NonSharable, Ports (#1) 0x64 - 0x64

[注释] i8042prt!I8xMouseStartDevice-> I8xMouseInitializeHardware-> [未完]
[接上] I8xInitializeHardwareAtBoot-> I8xToggleInterrupts(FALSE)
8042: I8xToggleInterrupts(FALSE), enter

8042: I8xTransmitControllerCommand: enter
8042: I8xGetControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x20 to command port
8042: I8xPutBytePolled: exit
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: 8042 controller
8042: I8xGetBytePolled: exit with Byte 0x47
8042: I8xGetControllerCommand: exit
8042: I8xTransmitControllerCommand: current CCB 0x47
8042: I8xPutControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x60 to command port
8042: I8xPutBytePolled: exit
8042: I8xPutControllerCommand: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x44 to data port
8042: I8xPutBytePolled: exit
8042: I8xTransmitControllerCommand: new CCB 0x44
8042: I8xGetControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x20 to command port
8042: I8xPutBytePolled: exit
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: 8042 controller
8042: I8xGetBytePolled: exit with Byte 0x44
8042: I8xGetControllerCommand: exit
8042: I8xTransmitControllerCommand: exit

[注释] i8042prt!I8xMouseStartDevice-> I8xMouseInitializeHardware-> [未完]
[接上] I8xInitializeHardwareAtBoot-> I8xInitializeHardware
8042: I8xInitializeHardware: enter

8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit

[注释] i8042prt!I8xMouseStartDevice-> I8xMouseInitializeHardware-> [未完]
[接上] I8xInitializeHardwareAtBoot-> I8xInitializeHardware-> I8xInitializeKeyboard
8042: I8xInitializeKeyboard, enter

8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xff to data port
8042: I8xPutBytePolled: waiting for ACK
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: keyboard
8042: I8xGetBytePolled: exit with Byte 0xfa
8042: I8xPutBytePolled: got ACK
8042: I8xPutBytePolled: exit
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: keyboard
8042: I8xGetBytePolled: exit with Byte 0xaa

8042: I8xTransmitControllerCommand: enter
8042: I8xGetControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x20 to command port
8042: I8xPutBytePolled: exit
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: 8042 controller
8042: I8xGetBytePolled: exit with Byte 0x44
8042: I8xGetControllerCommand: exit
8042: I8xTransmitControllerCommand: current CCB 0x44
8042: I8xPutControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x60 to command port
8042: I8xPutBytePolled: exit
8042: I8xPutControllerCommand: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x4 to data port
8042: I8xPutBytePolled: exit
8042: I8xTransmitControllerCommand: new CCB 0x4
8042: I8xGetControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x20 to command port
8042: I8xPutBytePolled: exit
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: 8042 controller
8042: I8xGetBytePolled: exit with Byte 0x4
8042: I8xGetControllerCommand: exit
8042: I8xTransmitControllerCommand: exit

8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xf3 to data port
8042: I8xPutBytePolled: waiting for ACK
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: keyboard
8042: I8xGetBytePolled: exit with Byte 0xfa
8042: I8xPutBytePolled: got ACK
8042: I8xPutBytePolled: exit
8042: I8xConvertTypematicParameters: enter
8042: I8xConvertTypematicParameters: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x0 to data port
8042: I8xPutBytePolled: waiting for ACK
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: keyboard
8042: I8xGetBytePolled: exit with Byte 0xfa
8042: I8xPutBytePolled: got ACK
8042: I8xPutBytePolled: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit

8042: I8xPutBytePolled: sending 0xed to data port
8042: I8xPutBytePolled: waiting for ACK
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: keyboard
8042: I8xGetBytePolled: exit with Byte 0xfa
8042: I8xPutBytePolled: got ACK
8042: I8xPutBytePolled: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x0 to data port
8042: I8xPutBytePolled: waiting for ACK
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: keyboard
8042: I8xGetBytePolled: exit with Byte 0xfa
8042: I8xPutBytePolled: got ACK
8042: I8xPutBytePolled: exit

8042: I8xTransmitControllerCommand: enter
8042: I8xGetControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x20 to command port
8042: I8xPutBytePolled: exit
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: 8042 controller
8042: I8xGetBytePolled: exit with Byte 0x4
8042: I8xGetControllerCommand: exit
8042: I8xTransmitControllerCommand: current CCB 0x4
8042: I8xPutControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x60 to command port
8042: I8xPutBytePolled: exit
8042: I8xPutControllerCommand: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x44 to data port
8042: I8xPutBytePolled: exit
8042: I8xTransmitControllerCommand: new CCB 0x44
8042: I8xGetControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x20 to command port
8042: I8xPutBytePolled: exit
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: 8042 controller
8042: I8xGetBytePolled: exit with Byte 0x44
8042: I8xGetControllerCommand: exit
8042: I8xTransmitControllerCommand: exit

8042: I8xInitializeKeyboard (0x0)

[注释] i8042prt!I8xMouseStartDevice-> I8xMouseInitializeHardware-> [未完]
[接上] I8xInitializeHardwareAtBoot-> I8xInitializeHardware-> I8xInitializeMouse
8042: I8xInitializeMouse enter
8042: I8xPutBytePolled: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xd4 to command port
8042: I8xPutBytePolled: exit
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xff to data port
8042: I8xPutBytePolled: waiting for ACK
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: mouse
8042: I8xGetBytePolled: exit with Byte 0xfa
8042: I8xPutBytePolled: got ACK
8042: I8xPutBytePolled: exit
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: 8042 controller
8042: I8xGetBytePolled: exit with Byte 0xaa
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: 8042 controller
8042: I8xGetBytePolled: exit with Byte 0x0
8042: Initializing via the interrupt
8042: I8xInitializeMouse: status = 0x0, FirstInit = 1

[注释] i8042prt!I8xMouseStartDevice-> I8xMouseInitializeHardware-> [未完]
[接上] I8xInitializeHardwareAtBoot-> I8xInitializeHardware
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xae to command port
8042: I8xPutBytePolled: exit

8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit

8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xa8 to command port
8042: I8xPutBytePolled: exit

8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit

[注释] I8xInitializeHardware 到此结束
8042: I8xInitializeHardware (k 0x0, m 0x0)

[注释] i8042prt!I8xMouseStartDevice-> I8xMouseInitializeHardware-> [未完]
[接上] I8xInitializeHardwareAtBoot-> I8xToggleInterrupts(TRUE)
8042: I8xToggleInterrupts(TRUE), enter

8042: I8xTransmitControllerCommand: enter
8042: I8xGetControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xad to command port
8042: I8xPutBytePolled: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xa7 to command port
8042: I8xPutBytePolled: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x20 to command port
8042: I8xPutBytePolled: exit
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: 8042 controller
8042: I8xGetBytePolled: exit with Byte 0x74
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xae to command port
8042: I8xPutBytePolled: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xa8 to command port
8042: I8xPutBytePolled: exit
8042: I8xGetControllerCommand: exit
8042: I8xTransmitControllerCommand: current CCB 0x44
8042: I8xPutControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x60 to command port
8042: I8xPutBytePolled: exit
8042: I8xPutControllerCommand: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x47 to data port
8042: I8xPutBytePolled: exit
8042: I8xTransmitControllerCommand: new CCB 0x47
8042: I8xGetControllerCommand: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xad to command port
8042: I8xPutBytePolled: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xa7 to command port
8042: I8xPutBytePolled: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0x20 to command port
8042: I8xPutBytePolled: exit
8042: I8xGetBytePolled: enter
8042: I8xGetBytePolled: 8042 controller
8042: I8xGetBytePolled: exit with Byte 0x77
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xae to command port
8042: I8xPutBytePolled: exit
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xa8 to command port
8042: I8xPutBytePolled: exit
8042: I8xGetControllerCommand: exit
8042: I8xTransmitControllerCommand: exit

[注释] i8042prt!I8xMouseStartDevice-> i8042prt!I8xMouseInitializeHardware
8042: I8xKeyboardConnectInterrupt:
FDO = 0xfe4f5020
Vector = 0xb3
Irql = 0xa
SynchIrql = 0xa
Intterupt Mode = Latched
Shared int: false
Affinity = 0x1
Floating Save = no

jiurl KeyboardClassPassThrough

8042: IOCTL: enter
8042: IOCTL: exit (0x0)
8042: result of sending 0xb3fcf was 0x0

[注释] ps/2 鼠标的调试信息,我们不关心
8042: I8xMouseConnectInterruptAndEnable:
FDO = 0xfe4d3ba0
Vector = 0x52
Irql = 0x4
SynchIrql = 0xa
Intterupt Mode = Latched
Shared int: false
Affinity = 0x1
Floating Save = no
8042: IOCTL: enter
8042: IOCTL: exit (0x0)
8042: result of sending 0xf3fcf was 0x0
8042: reset count = 255
8042: I8042StartIo: enter
8042: I8xControllerRoutine: internal reset mouse
8042: I8xPutBytePolled: enter
8042: I8xPutBytePolled: enter
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xd4 to command port
8042: I8xPutBytePolled: exit
8042: I8xDrainOutputBuffer: enter
8042: I8xDrainOutputBuffer: exit
8042: I8xPutBytePolled: sending 0xff to data port
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate ( 0)
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xaa
i8042 isr (mou): byte 0xaa
i8042 isr (mou): state (5) substate ( 0)
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0x0
i8042 isr (mou): byte 0x0
i8042 isr (mou): received id 0
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf2 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate ( 2)
i8042 isr (mou): expecting ID ACK (0xfa), got 0xfa
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0x0
i8042 isr (mou): byte 0x0
i8042 isr (mou): state (5) substate ( 3)
i8042 isr (mou): id from get device id is 0
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xe8 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate ( 6)
i8042 isr (mou): expecting ID ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0x0 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate ( 7)
i8042 isr (mou): expecting ID ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xe6 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate ( 8)
i8042 isr (mou): expecting ID ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xe6 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate ( 9)
i8042 isr (mou): expecting ID ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xe6 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (10)
i8042 isr (mou): expecting ID ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xe9 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (11)
i8042 isr (mou): expecting ID ACK (0xfa), got 0xfa
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0x10
i8042 isr (mou): byte 0x10
i8042 isr (mou): state (5) substate (12)
i8042 isr (mou): expecting (0x0), got 0x10
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0x0
i8042 isr (mou): byte 0x0
i8042 isr (mou): state (5) substate (13)
i8042 isr (mou): expecting (0x0), got 0x0
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0x64
i8042 isr (mou): byte 0x64
i8042 isr (mou): state (5) substate (14)
i8042 isr (mou): expecting (0x0), got 0x64
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xe8 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate ( 4)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0x3 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate ( 5)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf3 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (16)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xc8 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (17)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
i8042 isr (mou): (200)
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf3 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (16)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0x64 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (17)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
i8042 isr (mou): (100)
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf3 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (16)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0x50 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (17)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
i8042 isr (mou): (80)
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf3 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (16)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xc8 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (17)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
i8042 isr (mou): (200)
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf3 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (16)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xc8 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (17)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
i8042 isr (mou): (200)
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf3 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (16)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0x50 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (17)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
i8042 isr (mou): (80)
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf2 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (27)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0x3
i8042 isr (mou): byte 0x3
i8042 isr (mou): state (5) substate (28)
i8042 isr (mou): got a device ID of 3
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf3 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (29)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0x3c to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (30)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xe8 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (32)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0x3 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (33)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xd4 to command port
8042: I8xPutByteAsynchronous: exit
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf4 to data port
8042: I8xPutByteAsynchronous: exit
i8042 isr (mou): exit
i8042 isr (mou): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: mouse
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (mou): byte 0xfa
i8042 isr (mou): state (5) substate (31)
i8042 isr (mou): expecting ACK (0xfa), got 0xfa
i8042 isr (mou): exit
8042: I8xPutBytePolled: exit
8042: I8042StartIo: exit
8042: synch routine enter
8042: I8042CompletionDpc: enter
8042: I8042CompletionDpc: mouse reset complete
8042: I8042CompletionDpc: exit

8042: I8xMouseStartDevice successful
8042: I8xMouseStartDevice exit (0x0)

8042: I8xPnP (mou) exit (status=0x0)
8042: I8xPnP (mou), enter (min func=0x9)
8042: I8xPnP (mou) exit (status=0x0)
8042: I8xPnP (mou), enter (min func=0x9)
8042: I8xPnP (mou) exit (status=0x0)
8042: I8xPnP (mou), enter (min func=0x14)
8042: I8xPnP (mou) exit (status=0x0)
8042: I8xPnP (mou), enter (min func=0x7)
8042: I8xPnP (mou) exit (status=0x0)

[注释] kbdclass!KeyboardClassFindMorePorts
jiurl KeyboardClassFindMorePorts
jiurl KbdDeterminePortsServiced
KBDCLASS-KbdDeterminePortsServiced: RtlQueryRegistryValues failed with 0xc0000034

[注释] ps/2 鼠标的调试信息,我们不关心
8042: Create enter
8042: Enabling Mouse (1)
8042: Create (0)
8042: IOCTL: enter
8042: IOCTL: mouse query attributes
8042: IOCTL: exit (0x0)
8042: I8xPnP (mou), enter (min func=0x7)
8042: I8xPnP (mou) exit (status=0x0)

[注释] IRP_MJ_CREATE
jiurl KeyboardClassCreate
KBDCLASS-KeyboardClassCreate: enter
jiurl KbdEnableDisablePort
KBDCLASS-KbdEnableDisablePort: enter
jiurl KeyboardSendIrpSynchronously
8042: Create enter
8042: Enabling Keyboard (1)
jiurl KbdSyncComplete
8042: Create (0)
KBDCLASS-KbdEnableDisablePort: exit
KBDCLASS-KeyboardClassOpenClose: exit

[注释] IRP_MJ_DEVICE_CONTROL IOCTL: IOCTL_KEYBOARD_QUERY_ATTRIBUTES
jiurl KeyboardClassDeviceControl
KBDCLASS-KeyboardClassDeviceControl: enter
8042: IOCTL: enter
8042: IOCTL: keyboard query attributes
8042: IOCTL: exit (0x0)
KBDCLASS-KeyboardClassDeviceControl: exit

[注释] IRP_MJ_PNP IRP_MN_QUERY_DEVICE_RELATIONS
jiurl KeyboardPnP
8042: I8xPnP (kb), enter (min func=0x7)
8042: I8xPnP (kb) exit (status=0x0)

[注释] IRP_MJ_READ
jiurl KeyboardClassRead
KBDCLASS-KeyboardClassRead: enter
jiurl KeyboardClassStartIo
KBDCLASS-KeyboardClassStartIo: enter
KBDCLASS-KeyboardClassStartIo: DataIn 0xfe4f5908, DataOut 0xfe4f5908
KBDCLASS-KeyboardClassStartIo: entries in queue 0
KBDCLASS-KeyboardClassStartIo: exit
KBDCLASS-KeyboardClassRead: exit

[注释] IRP_MJ_DEVICE_CONTROL IOCTL: IOCTL_KEYBOARD_QUERY_INDICATORS
jiurl KeyboardClassDeviceControl
KBDCLASS-KeyboardClassDeviceControl: enter
8042: IOCTL: enter
8042: IOCTL: keyboard query indicators
8042: IOCTL: exit (0x0)
KBDCLASS-KeyboardClassDeviceControl: exit

[注释] IRP_MJ_DEVICE_CONTROL IOCTL: IOCTL_KEYBOARD_SET_INDICATORS
jiurl KeyboardClassDeviceControl
KBDCLASS-KeyboardClassDeviceControl: enter
8042: IOCTL: enter
8042: IOCTL: keyboard set indicators
8042: I8042StartIo: enter
8042: I8xControllerRoutine: keyboard set indicators
8042: I8042StartIo: exit
8042: IOCTL: exit (0x103)
KBDCLASS-KeyboardClassDeviceControl: exit

[注释] IRP_MJ_DEVICE_CONTROL IOCTL: IOCTL_KEYBOARD_SET_TYPEMATIC
jiurl KeyboardClassDeviceControl
KBDCLASS-KeyboardClassDeviceControl: enter
8042: IOCTL: enter
8042: IOCTL: keyboard set typematic
8042: I8042StartIo: enter
8042: I8xControllerRoutine: keyboard set typematic
8042: I8xConvertTypematicParameters: enter
8042: I8xConvertTypematicParameters: exit
8042: I8xInitiateIo: enter
8042: I8xInitiateIo: sending byte #0 (0xf3)
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf3 to data port
8042: I8xPutByteAsynchronous: exit
8042: I8xInitiateIo: exit
i8042 isr (kb): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: keyboard
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (kb): scanCode 0xfa
i8042 isr (kb): : ACK, i8042 isr (kb): now initiate send of byte #1
8042: I8xInitiateIo: enter
8042: I8xInitiateIo: sending byte #1 (0x20)
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0x20 to data port
8042: I8xPutByteAsynchronous: exit
8042: I8xInitiateIo: exit
i8042 isr (kb): exit
i8042 isr (kb): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: keyboard
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (kb): scanCode 0xfa
i8042 isr (kb): : ACK, i8042 isr (kb): all bytes have been sent
i8042 isr (kb): exit
8042: I8042StartIo: exit
8042: I8042CompletionDpc: enter
8042: I8042CompletionDpc: keyboard set typematic updated
8042: I8042CompletionDpc: new rate/delay 0x1e/1f4
8042: I8042CompletionDpc: exit
8042: IOCTL: exit (0x103)
KBDCLASS-KeyboardClassDeviceControl: exit

[注释] IRP_MJ_DEVICE_CONTROL IOCTL: IOCTL_KEYBOARD_SET_INDICATORS
jiurl KeyboardClassDeviceControl
KBDCLASS-KeyboardClassDeviceControl: enter
8042: IOCTL: enter
8042: IOCTL: keyboard set indicators
8042: I8042StartIo: enter
8042: I8xControllerRoutine: keyboard set indicators
8042: I8042StartIo: exit
8042: IOCTL: exit (0x103)
KBDCLASS-KeyboardClassDeviceControl: exit

[注释] IRP_MJ_DEVICE_CONTROL IOCTL: IOCTL_KEYBOARD_SET_TYPEMATIC
jiurl KeyboardClassDeviceControl
KBDCLASS-KeyboardClassDeviceControl: enter
8042: IOCTL: enter
8042: IOCTL: keyboard set typematic
8042: I8042StartIo: enter
8042: I8xControllerRoutine: keyboard set typematic
8042: I8xConvertTypematicParameters: enter
8042: I8xConvertTypematicParameters: exit
8042: I8xInitiateIo: enter
8042: I8xInitiateIo: sending byte #0 (0xf3)
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0xf3 to data port
8042: I8xPutByteAsynchronous: exit
8042: I8xInitiateIo: exit
i8042 isr (kb): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: keyboard
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (kb): scanCode 0xfa
i8042 isr (kb): : ACK, i8042 isr (kb): now initiate send of byte #1
8042: I8xInitiateIo: enter
8042: I8xInitiateIo: sending byte #1 (0x20)
8042: I8xPutByteAsynchronous: enter
8042: I8xPutByteAsynchronous: sending 0x20 to data port
8042: I8xPutByteAsynchronous: exit
8042: I8xInitiateIo: exit
i8042 isr (kb): exit
i8042 isr (kb): enter
8042: I8xGetByteAsynchronous: enter
8042: I8xGetByteAsynchronous: keyboard
8042: I8xGetByteAsynchronous: exit with Byte 0xfa
i8042 isr (kb): scanCode 0xfa
i8042 isr (kb): : ACK, i8042 isr (kb): all bytes have been sent
i8042 isr (kb): exit
8042: I8042StartIo: exit
8042: I8042CompletionDpc: enter
8042: I8042CompletionDpc: keyboard set typematic updated
8042: I8042CompletionDpc: new rate/delay 0x1e/1f4
8042: I8042CompletionDpc: exit
8042: IOCTL: exit (0x103)
KBDCLASS-KeyboardClassDeviceControl: exit

[注释] IRP_MJ_DEVICE_CONTROL IOCTL: IOCTL_KEYBOARD_SET_INDICATORS
jiurl KeyboardClassDeviceControl
KBDCLASS-KeyboardClassDeviceControl: enter
8042: IOCTL: enter
8042: IOCTL: keyboard set indicators
8042: I8042StartIo: enter
8042: I8xControllerRoutine: keyboard set indicators
8042: I8042StartIo: exit
8042: IOCTL: exit (0x103)
KBDCLASS-KeyboardClassDeviceControl: exit



欢迎交流,欢迎交朋友,
欢迎访问
主页 http://jiurl.yeah.net http://jiurl.nease.net 论坛 http://jiurl.cosoft.org.cn/forum

f啊k,不带你们这样的啊,有好事不叫我。

 

 

0 0

相关博文

我的热门文章

img
取 消
img