发表于2004/7/12 16:50:00 1691人阅读
|Error Code Description |
Code 1 This device is not configured correctly.
Code 2 Windows cannot load the driver for this device.
Code 3 The driver for this device might be corrupted, or your system may be running low on memory or other resources.
Code 4 This device is not working properly. One of its drivers or your registry might be corrupted.
Code 5 The driver for this device needs a resource that Windows cannot manage.
Code 6 The boot configuration for this device conflicts with other devices. Cannot filter.
Code 7 Cannot filter.
Code 8 The driver loader for the device is missing.
Code 9 This device is not working properly because the controlling firmware is reporting the resources for the device incorrectly.
Code 10 This device cannot start.
Code 11 This device failed.
Code 12 This device cannot find enough free resources that it can use.
Code 13 Windows cannot verify this device's resources.
Code 14 This device cannot work properly until you restart your computer.
Code 15 This device is not working properly because there is probably a renumeration problem.
Code 16 Windows cannot identify all the resources this device uses.
Code 17 This device is asking for an unknown resource type.
Code 18 Reinstall the drivers for this device.
Code 19 Your registry might be corrupted.
Code 21 Windows is removing this device.
Code 22 This device is disabled.
Code 24 This device is not present, is not working properly, or does not have all its drivers installed.
Code 25 Windows is still setting up this device. (Same text as Code 26.)
Code 26 Windows is still setting up this device. (Same text as Code 25.)
Code 27 This device does not have valid log configuration.
Code 28 The drivers for this device are not installed.
Code 29 This device is disabled because the firmware of the device did not give it the required resources.
Code 31 This device is not working properly because Windows cannot load the drivers required for this device.
Code 32 A driver for this device was not required and has been disabled.
Code 33 Windows cannot determine which resources are required for this device.
Code 34 Windows cannot determine the settings for this device.
Code 35 Your computer's system firmware does not include enough information to properly configure and use this device.
Code 36 This device is requesting a PCI interrupt but is configured for an ISA interrupt (or vice versa).