## CSDN博客

### PHP对象编程实现3D饼图

<?php

//公用函数

//把角度转换为弧度
function deg2Arc($degrees) { return($degrees * (pi()/180.0));
}

//RGB
function getRGB($color){$R=($color>>16) & 0xff;$G=($color>>8) & 0xff;$B=($color) & 0xff; return (array($R,$G,$B));
}

// 取得在椭圆心为（0，0）的椭圆上 x,y点的值
function pie_point($deg,$va,$vb){$x= cos(deg2Arc($deg)) *$va;
$y= sin(deg2Arc($deg)) * $vb; return (array($x, $y)); } //3D饼图类 class Pie3d{ var$a; //椭圆长半轴
var $b; //椭圆短半轴 var$DataArray; //每个扇形的数据
var $ColorArray; //每个扇形的颜色 要求按照十六进制书写但前面不加0x //为边缘及阴影为黑色 function Pie3d($pa=100,$pb=60,$sData="100,200,300,400,500", $sColor="ee00ff,dd0000,cccccc,ccff00,00ccff") {$this->a=$pa;$this->b=$pb;$this->DataArray=split(",",$sData);$this->ColorArray=split(",",$sColor); } function setA($v){
$this->a=$v;
}

function getA(){
return $this->a; } function setB($v){
$this->b=$v;
}

function getB(){
return $this->b; } function setDataArray($v){
$this->DataArray=split(",",$v);
}

function getDataArray($v){ return$this->DataArray;
}

function setColorArray($v){$this->ColorArray=split(",",$v); } function getColorArray(){ return$this->ColorArray;
}

function DrawPie(){
$image=imagecreate($this->a*2+40,$this->b*2+40);$PieCenterX=$this->a+10;$PieCenterY=$this->b+10;$DoubleA=$this->a*2;$DoubleB=$this->b*2; list($R,$G,$B)=getRGB(0);
$colorBorder=imagecolorallocate($image,$R,$G,$B);$DataNumber=count($this->DataArray); //$DataTotal
for($i=0;$i<$DataNumber;$i++) $DataTotal+=$this->DataArray[$i]; //算出数据和 //填充背境 imagefill($image, 0, 0, imagecolorallocate($image, 0xFF, 0xFF, 0xFF)); /* ** 画每一个扇形 */$Degrees = 0;
for($i = 0;$i < $DataNumber;$i++){
$StartDegrees = round($Degrees);
$Degrees += (($this->DataArray[$i]/$DataTotal)*360);
$EndDegrees = round($Degrees);
$percent = number_format($this->DataArray[$i]/$DataTotal*100, 1);
list($R,$G,$B)=getRGB(hexdec($this->ColorArray[$i]));$CurrentColor=imagecolorallocate($image,$R,$G,$B);
if ($R>60 and$R<256) $R=$R-60;
if ($G>60 and$G<256) $G=$G-60;
if ($B>60 and$B<256) $B=$B-60;
$CurrentDarkColor=imagecolorallocate($image,$R,$G,$B); //画扇形弧 imagearc($image,$PieCenterX,$PieCenterY,$DoubleA,$DoubleB,$StartDegrees,$EndDegrees,$CurrentColor); //画直线 list($ArcX, $ArcY) = pie_point($StartDegrees , $this->a ,$this->b);
imageline($image,$PieCenterX,$PieCenterY,floor($PieCenterX + $ArcX),floor($PieCenterY + $ArcY),$CurrentColor);
//画直线
list($ArcX,$ArcY) = pie_point($EndDegrees,$this->a , $this->b); imageline($image,$PieCenterX,$PieCenterY,ceil($PieCenterX +$ArcX),ceil($PieCenterY +$ArcY),$CurrentColor); //填充扇形$MidPoint = round((($EndDegrees -$StartDegrees)/2) + $StartDegrees); list($ArcX, $ArcY) = Pie_point($MidPoint, $this->a*3/4 ,$this->b*3/4);

imagefilltoborder($image,floor($PieCenterX + $ArcX),floor($PieCenterY + $ArcY),$CurrentColor,$CurrentColor); imagestring($image,2,floor($PieCenterX +$ArcX-5),floor($PieCenterY +$ArcY-5),$percent."%",$colorBorder);

//画阴影
if ($StartDegrees>=0 and$StartDegrees<=180){
if($EndDegrees<=180){ for($k = 1; $k < 15;$k++)
imagearc($image,$PieCenterX, $PieCenterY+$k,$DoubleA,$DoubleB, $StartDegrees,$EndDegrees, $CurrentDarkColor); }else{ for($k = 1; $k < 15;$k++)
imagearc($image,$PieCenterX, $PieCenterY+$k,$DoubleA,$DoubleB, $StartDegrees, 180,$CurrentDarkColor);
}

}
}

/*到此脚本已经生了一幅图像了
**现在需要的是把它发到浏览器上，重要的一点是要将标头发给浏览器，让它知道是一个GIF文件。不然的话你只能看到一堆奇怪的乱码
*/
//输出生成的图片
imagegif($image); imagedestroy($image);
}//End drawPie()
}//End class

//实现

$objp = new Pie3d();$objp->DrawPie();
?>
0 0