综合

img yzsind

如何用ping 命令简单测试网速

发表于2004/10/31 20:06:00  24085人阅读

分类: Microsoft

命令格式:

ping ip地址 -l 字节数

注:上面的命令中 l 是字母l,不是数字1

网速等于≈(发送的字节数/返回的时间[毫秒])K字节

以上计算的结果速为字节(byte),不是我们通常说的位(bps)

如:

C:/Documents and Settings/Administrator>ping 202.101.224.68 -l 1000

Pinging 202.101.224.68 with 1000 bytes of data:

Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251
Reply from 202.101.224.68: bytes=1000 time=38ms TTL=251

Ping statistics for 202.101.224.68:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 38ms, Maximum = 38ms, Average = 38ms

根据上述发送及返回的信息可以简单得出到地址202.101.224.68的网速为:

网速等于≈(发送的字节数/返回的时间[毫秒])K字节
        ≈1000/38K字节
        ≈26.32K字节

 

 

附:ping命令帮助说明


C:/Documents and Settings/Administrator>ping /?

Usage: ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS]
            [-r count] [-s count] [[-j host-list] | [-k host-list]]
            [-w timeout] [-R] [-S srcaddr] [-4] [-6] target_name

Options:
    -t             Ping the specified host until stopped.
                   To see statistics and continue - type Control-Break;
                   To stop - type Control-C.
    -a             Resolve addresses to hostnames.
    -n count       Number of echo requests to send.
    -l size        Send buffer size.
    -f             Set Don't Fragment flag in packet (IPv4-only).
    -i TTL         Time To Live.
    -v TOS         Type Of Service (IPv4-only).
    -r count       Record route for count hops (IPv4-only).
    -s count       Timestamp for count hops (IPv4-only).
    -j host-list   Loose source route along host-list (IPv4-only).
    -k host-list   Strict source route along host-list (IPv4-only).
    -w timeout     Timeout in milliseconds to wait for each reply.
    -R             Trace round-trip path (IPv6-only).
    -S srcaddr     Source address to use (IPv6-only).
    -4             Force using IPv4.
    -6             Force using IPv6.


C:/Documents and Settings/Administrator>

阅读全文
0 0

相关文章推荐

img
取 消
img